Development of Prototype System Design with The Application of Technology

Authors

  • Titi Ratnasari Institut Teknologi PLN
  • Intan Ratna Sari Yanti Institut Teknologi PLN
  • Dwi Anggaini Institut Teknologi PLN

DOI:

https://doi.org/10.59889/ijembis.v2i2.70

Keywords:

Cabinets, RFID, Mikrokontroller, Arduino, Renewable energy

Abstract

The development of a system designed in such a way as to become security that makes everyone feel the need to ensure the safety of everything that includes himself, both from his activities and the assets he owns. This system uses an RFID Reader with a frequency of 13.56 MHz and an ATMega328 Microcontroller that acts as a controller or circuit controller and is tested with hardware and software testing to determine the performance between the software and hardware of the device. This research shows that the RFID Reader can detect E-KTP with a maximum distance of 2.5 cm, and the solenoid will lock back after 3 seconds. The utilization of Renewable Energy is currently a priority in carrying out technology development, one of which is solar energy with solar panels as electrical energy. This research supports efforts to develop energy-based technology that is converted with various supporting components and system authentication designed using the use of control security systems both in terms of administration and information technology-based on population data and uncontrolled system prototypes.

Downloads

Download data is not yet available.

References

Arduino,2016. https://www.arduino.cc/en/Main/ArduinoBoardProMini. Access date March 5, 2016.

Daniel Hunt, 2017. RFID A Guide to Radio Frequency Identification, John Wiley & Sons Inc, New York.

Dedy Rahman Wijaya, 2014. "Middleware Architecture For National Electronic Id Card: The Case Of E-Ktp In Indonesia." Journal of Theoretical and Applied Information Technology. Vol.9, No. 3.

Eko Saputro, 2016. "Design Automatic Door Safety Building Using Microcontroller Based E-KTP Atmega328." Department of Electrical Engineering, Faculty of Engineering, University of North Sumatra.

Putri, T. W. O., Mowaviq, M., & Hajar, I. (2021). Rancang Bangun Sistem Kendali Level Air Berbasis Programmable Logic Controller dan Human Machine Interface. KILAT, 10(2), 272 - 279. https://doi.org/10.33322/kilat.v10i2.1315

Regulation of the Minister of Home Affairs, No: 6 the Year 2011 About Hardware Specifications, Nik Based KTP Software and Blangko Nationally, Jakarta.

Supriyono, 2010." Application of RFID In the Field of Library." JMTE,Vol.2,No.2.

Tadu Puasandi, 2014. "Electric Key Control Access System Using E-KTP Reading" Studentjournal. Vol.1, No. 1.

Using RFID and Databases." Scientific Magazine UNIKOM, Vol.12, No. 2.

Downloads

Published

2022-05-29

How to Cite

Ratnasari, T. ., Yanti, I. R. S. ., & Anggaini, D. . (2022). Development of Prototype System Design with The Application of Technology . INTERNATIONAL JOURNAL OF ECONOMICS, MANAGEMENT, BUSINESS, AND SOCIAL SCIENCE (IJEMBIS), 2(2), 292–298. https://doi.org/10.59889/ijembis.v2i2.70

Issue

Section

Articles